YG8 tungsten carbide tip glass drill bit, cemented carbide tip glass drill bit
Key words:
hard metal
Classification:
Glass drill bits
- 产品描述
-
- Commodity name: YG8 tungsten carbide tip glass drill bit, cemented carbide tip glass drill bit
- Commodity ID: 1310963872017567744
CARBIDEGLASSCUTTERcarbideglasscutterisalsocalledhardalloyglasscutter,itismadebytungstencarbide.Thecarbideglasscutterisforcuttingorbreakingglass.ithashighhardness andexcellentabrasiveresistance.Andforc
CARBIDE GLASS CUTTER
carbide glass cutter is also called hard alloy glass cutter, it is made by tungsten carbide.The carbide glass cutter is for cutting or breaking glass.it has high hardness and excellent abrasive resistance.And for customers' requirements,the carbide glass cutter can provided without or with coated Ti.Application:
This is a kind of glass cutter fixed with high quality Carbide Cutting Wheel, and widely used in flat glass etc for below advantages:
1. Carbide wheel is super, blade tip is specially processed, make your cutting line near perfect.
2. Handle is made of alloy or plastic, not easy to break or crack.some other is made of metal, very durable
3. Metal points are made of copper which is more durable and stainless, becose copper is heavier, could knock off the glass easily after cutting.Grade
Equal to
ISO Category
Number
Performance
Application
Density
Bend Strength
Hardness
G/Cm3
N/mm2
HRA
YG3
K01
14.9-15.3
≥1180
≥90.5
sand-blasting nozzlesQualified for fine turning and
half-fine turning when cast iron, non-ferrous metal, alloys as well as non-alloy materials cutting consecutively.
Can make wire drawing of steel and non-ferrous metal.
Also qualified for sand-blasting nozzles.
YG3X
K01
15.1-15.4
≥1300
≥91.5
YG6X
K10
14.8-15.1
≥1560
≥91.0
Qualified for machining of chilled cast iron,
alloy cast iron, refractory steel
and alloy steel. Also Qualified
for the machining of common cast iron.
YG6A
K10
14.7-15.1
≥1580
≥91.0
YG6
K20
14.7-15.1
≥1670
≥89.5
Qualified for finish machining and semi-finish
machining for the cast iron, non-ferrous metal,
alloy and unalloyed materials.
Also qualified for wire drawingfor the steel and non-ferrous metal, electric drill for geology use and steel drill etc.
YG8
K20-K30
14.6-14.9
≥1840
≥89
Qualified for rough machining of cast iron, non-ferrous metal, nonmetal materials, drawing of steel, non-ferrous metal and pipes, various drills
for geology use, tools for machine
manufacture and wearing parts.
YT15
P10
11.1-11.6
≥1180
≥91.0
Qualified for rough machining, semi-finish machining
and finish machining during
consecutive machining of
carbon steel and alloy steel.
YT14
P20
11.2-11.8
≥1270
≥90.5
Qualified for rough machining for rough face
of carbon steel and alloy steel, half process
during discontinuity cutting.
YT5
P30
12.5-13.2
≥1430
≥89.5
Qualified for rough machining for
rough face of carbon steel and alloy
steel and discontinuity cutting.
YW1
M10
12.7-13.5
≥1180
≥91.5
Qualified for finishing and semi-finishing
machining of refractory steel,
high manganese steel and common steel.
YW2
M20
12.5-13.2
≥1350
≥90.5
Qualified for semi-finishing machining of refractory steel,
high manganese steel and common steel.
*Other sizes can be provided upon your requests.
Previous Page
Product inquiry
Note: Please leave your contact information and our professionals will contact you as soon as possible!
Contact Person: Teresa
Address: Building 2, Dahan Hewlett-Packard Industrial Park, Tianyuan District, Zhuzhou City, Hunan Province China
Concerned about the public.